HP printers pause and go offline when they are not used for a long period of time or when they are inactive for a long period of time. This issue is known as the “HP Printer Paused Error.” The HP Printer Paused option allows you to manually adjust or change any job while it is running. After completing your printing task, you can reset the pause printing option and resume printing. If you have any problems, you can call HP error recovery, where experts will handle your problem and try to solve it as quickly as possible.
Why does my HP printer claim it’s on hold?
There are several reasons why your printer might be paused. Print spoolers, paper jams, and printer software are some of the causes of this massive problem.
What are the basic steps to resolving the HP printer halted issue?
There are three options for resolving this problem. The most important ways to resolve your HP printer’s stop issue are listed below. To avoid any problems with your printing, please follow these steps.
The driver can be reinstalled or uninstalled.
When you use the reset option on a USB-connected product, a higher DOT4 00x port is created, which can cause the printer to hang when printing.
Note: This is only required for goods that are connected to a USB port.
- Remove the USB printer driver.
- Remove the HP and AIO folders from your hard drive.
- Reinstall the USB printer driver after that.
- The Cause of the Issue: This error can arise when printing from a laptop or while utilising a network. The printer is either in “Pause Printing” or “Work Offline” mode when the printing job is in the pending condition.
Method 1
- Uncheck the box next to Pause Printing.
- If you’re using a Windows desktop, go to “start,” then “settings,” and finally “Printers.”
- Press and hold the right mouse button on the printer icon.
- Remove the check from the “Pause Printing” or “Work Offline” option, if it is enabled.
- Print the document once again.
- Construct a parallel connection.
- Disconnect the printer from the network or turn it off.
- Use a parallel cable to connect your personal computer or laptop.
- Turn the printer on.
- When you’ve completed the task, print the document once again.
Method 1
- Check the settings to see if the pause button is “on” or not.
- Place your HP printer’s control panel on the front. That’s the part of the printer’s case with the buttons on it.
- Press and hold the “Pause” button for a few seconds.
Your printer will no longer be paused.
After that, you must perform the following procedures to verify the computer’s software.
- Double-click the “HP printer” icon on your computer’s taskbar.
Following that, your laptop or desktop screen will display a list of all the documents you need to print.
- Right-click on the screen with the status “Paused” listed.
6. Select “Resume” to restart your printer’s operation.
This is the best way to fix the HP PRINTER PAUSED ERROR.