At this time, the Brother printer is the most extensively used printing device on the market. It offers consumers high-quality printing services as well as high-quality fax and scan capabilities. However, because no electronic gadget is immune to technological problems in our world, consumers may experience some common issues or errors with this service. We’ll talk about the Brother printer error code 30 today in all of them. So, if you’re having trouble with this problem on your printer, you can get a flawless solution by following the methods outlined in this article.
Learn more about the causes of Brother Printer Error : –
- If your Brother printer is displaying this error, the following could be the cause:
- When the print head carriage fails to return to its home position on the unit’s far right.
- Both springs on every side of a carriage are out of alignment.
- When the cartridge covers aren’t properly fastened in place.
Read more: Brother Printer Troubleshooting User Guide
How do I fix my Brother printer it won’t print?
Using the solutions provided, you can resolve this brother printer error code 30. To get a quick fix for this problem, you must follow each and every step provided.
Solution-1
- To begin, use plastic tabs to open the scanner’s lid; they can be found on the left and right sides of the machine.
- Shift the print head to the center now.
- Check for any pieces of paper, staples, or paper clips that should not be present.
- If you encounter the issue again, proceed to the next step.
Solution-2
- To begin, carefully hold the scanner cover in place using the plastic tabs on the left and right sides of the printer until it locks into the open position.
- To check that the entire encoder strip is clean, shift the print head over to the right side under the cover.
- Using a lint-free cloth, firmly grasp the encoder strip on both sides and scrub the cloth down the strip at least three times from one end to the other.
- If the issue shows on our printer again, you can move on to the next step.
Solution 3:
- Check the encoder strip’s location to see if it’s in the right spot or not.
- Now you must re-insert the strip into the printer.
- To check printing quality, restart your printer and print a test page.
Conclusion: If you continue to have problems with your printer, you can seek help from the Brother printer certified team. If you wish to get in touch with them, dial the Brother Printer Service phone number. It is a toll-free helpline for customers of Brother printers. If you don’t understand a problem with your Brother printer, you can contact Brother Printer Service.