Removing Error Code 14 on an HP Printer can seem like a serious problem, but it’s usually easy to resolve with just a couple of quick steps. This error typically means your printer isn’t recognizing the toner cartridge properly. In this guide, we’ll walk you through two simple solutions to get your HP printer working again in minutes.Read:-Scan on HP Envy Inspire 7900e
What Is HP Printer Error Code 14
An Error Code 14 on an HP printer means the printer can no longer detect the toner cartridge. It may appear as:
- “Cartridge not installed”
- “Install toner cartridge”
- Or a flashing cartridge icon on the printer display
This is a known issue on these printers.
Primary Causes of Error Code 14
- Went the wrong direction with the cartridge
- Faulty or incompatible toner cart.
- Dirty cartridge contacts
- Source: Firmware or Software are Outdated or Problems.
A Step-by-Step Tutorial on Removing Error Code 14 On HP Printer
Step 1 – Reinstall the Toner cartridge
- Turn off your HP printer.
- Open the toner access door.
- Carefully take out the toner cartridge.
- Push it back in with a good shove until it clicks.
- Shut the door and power on the printer.
Clean the Contacts on the Cartridge
- Take out the toner cartridge once more.
- Clean the metal (copper color) contacts on the cartridges with a clean, lint-free cloth.
- Insert the cartridge back and turn on the printer.
When You Need to Replace the Cartridge
If the error persists, after you attempt the cleaning and reinstall, the cartridge is likely defective or may not be compatible for your printer model. Use HP toner cartridges not refilled cartridges to solve the problem.
Final Words
You no need to panic, the HP printer error code 14 fix that only just in a few minutes. By doing the above steps simple – re-attach and clean the cartridge, your problem is usually gone in no time. If the issue persists, try a new cartridge, or contact HP support for further help Removing Error Code 14 On HP Printer