Encountering the Canon B200 error on your printer? You’re not alone. This is one of the most common and frustrating issues faced by Canon printer users. Whether you’re using a Canon PIXMA model or another inkjet variant, this error typically signals a severe problem related to the print head. In this blog, we’ll explain what the Canon B200 error means, its causes, and how to fix it.
What Is the Canon B200 Error?
The B200 error usually appears on Canon inkjet printers and often reads:
“Support Code B200: Printer Error Has Occurred.”
This error typically points to
- A damaged or overheated print head
- Incompatible or defective cartridges
- Internal hardware malfunction
- Power supply or logic board failure
Printers known for experiencing this issue include the Canon PIXMA MG5320, MX922, MG5520, and MP560 series, among others.
Quick Fixes for the Canon B200 Error
Before you consider replacing your printer, try the following solutions:
Restart the Printer
- Turn off the printer and unplug it for 10–15 minutes.
- Plug it back in and power it on. Sometimes, this simple reset clears the error.
2. Remove and Reinsert Ink Cartridges
- Open the printer lid.
- Carefully remove all ink cartridges.
- Reinsert them firmly and restart the printer.
3. Clean the Print Head
- Remove the print head carefully (refer to your model’s manual).
- Clean it with a lint-free cloth and warm distilled water.
- Allow it to dry completely before reinstalling.
4. Use Genuine Canon Ink
- Non-OEM cartridges can trigger the B200 error.
- Switch to genuine Canon cartridges to see if that resolves the issue.
Advanced Troubleshooting Steps
If basic fixes don’t work, try the following:
- Update or Reinstall Drivers:
Go to the Canon Support Page and download the latest drivers for your model. - Check for Firmware Updates:
Some models allow you to update firmware directly from the printer’s screen or through Canon software. - Bypass the Error (Temporary Fix):
In some cases, holding the Stop/Reset button for 5–10 seconds can bypass the error, though this is not a permanent fix.
When to Contact Canon Support
If all else fails, the print head or logic board may need replacing — an expensive repair that often isn’t cost-effective. Visit the official Canon printer support page for authorized service options Official Canon B200 Error Help
Final Thoughts
The Canon B200 error can feel like the end of your printer, but many users successfully resolve it with careful troubleshooting. Always start with the basic steps and escalate only if necessary. And remember — using genuine cartridges and keeping your firmware updated can help prevent this issue in the future.
Need help right away? Visit our All Printers Immediate Support page for expert assistance across all Canon printer models.
